About the Yale Lever Hoist UNO Plus A Series
With a few tweaks here and there the UNOplus has been developed into the ‘A’ series to be even easier to use with a more ergonomic design. Additionally the overall weight of the hoist has been somewhat reduced. This makes the hoist easier to handle and transport to an location where it may be needed.
You can lift and lower, pull and tension with this lever hoist. This means it can be used to move those awkward and heavy loads or tension lashings to keep loads safe. In all this is a very versatile piece of lifting equipment.
The gearing mechanism has been optimized and together with the improved bearings and shorter lever/handle minimal effort is needed to operate it. The lever incorporates a rubberised grip for non-slip handling.
To make matters even easier, there is a free chaining mode which enables quick take up of slack chain. It also enables chain to be pulled out to secure to a load without hindrance. Unplanned load chain slipping is prevented thanks to the load sheave and closed chain guide. The hoist comes with a 1.5 metre height of lift as standard but if you need any other length then please get in touch.
Additionally there are some parts that are zinc plated and yellow chromated for good corrosion protection. The rugged design of the Yale UNO plus A series lever hoist incorporates a load pressure brake, bolt on forged hooks with safety catches and an impact resistant steel frame for rigorous use.
Other Ratchet Lever Hoists
Lifting Hoists Direct can supply a range of other lever hoists both by Yale and other manufacturers like LGD, Kito and Hacketts. There is an abundance of lifting capacities to choose from so there should be something to suit your application. Our range of cable pullers can also be used to pull and tension loads so these may be worth taking a look at to ensure you get the best hoist for your requirements.
If you would like a little help with your choice then simply give our sales team a call, we are always ready to help.
|Model UNO Plus A||Capacity||No. of chain Falls||Chain Dimensions d x p (9mm)||Lift with 1 full lever turn (mm)||Handle Pull at Wll (daN)||Weight at standard lift (1.5m) kg|
|Model UNO Plus A||750||1500||3000||6000|
|A min. mm||312||375||445||563|